One common gun control argument is that America’s Founding Fathers could not have imagined the repeating “assault weapons” of today. But when the Second Amendment was written in 1791, numerous guns already existed that were capable of far faster firing rates than the typical muzzle-loading flintlocks of the era.
America’s Founding Fathers saw natural rights as timeless and viewed the rights of a free people as existing regardless of the medium in which they were exercised. This included the right to bear arms as a means to prevent a government monopoly of force, so advancements in firearms technology do not change the intention of the Second Amendment. Still, the question of which assault weapons the Founding Fathers knew about is a fascinating and often misrepresented topic, so let’s take a look at some of the repeating rifles, volley guns, and fast loading firearms that were available during their lifetimes.
The Chelembrom Repeating Flintlock
While it’s true that the average flintlock in 1776 had to be reloaded after every shot, the concept of repeating guns predates both the Second Amendment and the American Revolution by several centuries. A variety of multi-shot firearms were available well before the United States declared independence. Among the most notable assault weapon designs that the Founding Fathers may have known about were the Kalthoff breech-loading mechanisms and the Lorenzoni family of repeating flintlocks.
Variants of the Lorenzoni repeating system, an invention from 1688, were one of several types of rapid-fire guns being produced in 1791. One of the finest and rarest examples is the Chelembrom magazine repeating flintlock. Thought to be the creation of a French gunmaker working in India, few of these innovative and complex Chelembrom guns survive to the present day. Though employed primarily as hunting weapons, some of these repeaters appear to have been used on the battlefield in 1785. As noted by the Royal Collection Trust in the United Kingdom, at least one of these flintlock magazine guns was acquired by the nemesis of Colonial America, King George III himself.
Carrying 20 rounds, the Chelembron magazine-fed repeaters are flintlock predecessors to the famous Henry repeating rifle but predates the Henry by nearly 200 years. In Royal Sporting Guns at Windsor, the complicated operation of this system is described.
With the muzzle pointing upwards the barrel and its magazines are turned in a clockwise direction. This movement leads to the following chain of events. A charge of powder is measured into the dropping tube and a small portion is deposited in the priming pan which is then closed and the lock cocked. The rest of the powder falls into a chamber in the brass receiver. At the same time a bullet is released and drops into a covered trough. The barrel is moved further round until it is opposite the bullet, which is thrust upwards into the barrel by a plunger or spring. The gun is then reversed and the barrel assembly turned back to its original position. The mouth of the barrel with its seated bullet then lies opposite a chamber full of powder.
Because the powder magazine is away from the point of ignition, the system is fairly safe compared to other repeating flintlock designs. Though far more complicated to manufacture than the typical guns of the 18th century, Chelembron repeating flintlocks offered a significantly higher firing rate when they were properly maintained and operated.
The Lorenzoni Repeating Flintlock
Designed in 1688 by Michele Lorenzoni, an Italian gunmaker in Florence, the Lorenzoni repeating flintlock was leagues ahead of its time. Among the most well-known multi-shot guns that existed when the 2nd Amendment was written, the Lorenzoni system, like the Chelembrom style featured above, was offered in both pistol and long gun variants that could be cocked and primed in a single operation.
The first Lorenzoni-style repeater that appeared in the American Colonies was manufactured by London gunsmith John Cookston. A later smith, John Shaw, relocated to Boston in 1750 and began producing and selling several repeating flintlock variations for the American market that ranged from seven to twelve shot magazines. Billed as John Shaw’s Cookson Volitional Repeaters, Shaw advertised his guns in the Boston Gazette, the most widely read newspaper in 18th Century America, making many early Americans very much aware of high capacity repeating firearms.
The Girandoni Repeating Air Rifle
Also predating the Constitution and the Bill of Rights, the 1779 Girandoni repeating air rifle used air reservoirs instead of gunpowder to fire up to 22 rounds per minute. A smokeless, breech-loaded, magazine-fed, comparatively quiet gun that was lethal up to 150 yards, it’s no wonder that Thomas Jefferson later had one sent along with Lewis and Clark on their historic 1803 expedition to explore the American West.
The Girandoni repeating air rifle had already been in service with the Austrian army for over a decade when the Second Amendment was written. Sporting variations were also manufactured, including this lightweight example that was almost certainly intended for civilian use. If the iron air reservoirs weren’t so difficult to produce with the technology of the period, and Bartolomeo Girandoni and his competitors hadn’t kept the details of their inventions so guarded, the air rifle may have had a more dramatic impact on the evolution of firearms.
The Belton Fusil and Superposed Flintlocks
The Belton “Roman candle” fusil is the first known repeating firearm invented in American. Produced since at least 1758, Joseph Belton’s repeating fusil design employed superimposed loads that fired in succession after a single pull of the trigger using a chained charge much like a Roman candle. Joseph Belton, an inventor and gunsmith from Benjamin Franklin’s hometown of Philadelphia, not only produced his innovative firearm for the public, he petitioned the Continental Congress during the American Revolution in hopes of a largescale military contract.
In 1776, Belton wrote to Congress claiming he’d designed a way to make a musket discharge up to eight rounds in three seconds. Benjamin Franklin wrote to George Washington in support of the idea, and Washington initially commissioned 100 of Belton’s rapid-fire muskets for the Continental Army. A disagreement over money ultimately canceled the proposal, as Belton was convinced his invention was worth a far higher sum than the fledging American government could afford. Belton continued to sell his guns to the public, and his inquires with the Continental Congress have left a detailed written account of how America’s founders not only knew about repeating weapon technology, but debated financing its mass production.
Belton’s design was promising, and three decades after the ratification of the Bill of Rights, during the administration of Founding Father James Monroe, a wealthier United States government gave the technology a second look. The Ellis-Jennings repeating rifle was created in variations that could fire up to ten shots before reloading. Over 500 Ellis-Jennings four-shot sliding lock repeaters were manufactured under contract with the U.S. government at the cost of $13,090, a substantial purchase for the period that demonstrated confidence in the technology.
The Puckle Gun
Yes, there was such a thing as a flintlock assault weapon, and it was constructed over 70 years prior to the Second Amendment. Invented by James Puckle in 1718 as an anti-boarding weapon for the British navy, the Puckle Gun used a pre-loaded revolving cylinder that could fire nine shots per minute, more than three times faster than the average period musket.
Though in truth it was more of a repeating swivel gun than the early machine gun sometimes portrayed, the Puckle Gun, or “Defense Gun” was designed with both round and square-shaped bullets in mind. The later rounds were intended for Ottoman Turks and their relentless raids along the Mediterranean coastline. Though rejected by the British Navy and never widely produced, the Puckle Gun was a clever piece of engineering for the time, and later attempts at tripod mounted repeating guns employed some of the same concepts.
Nock Volley Guns and the Duckfoot Pistol
Designed by James Wilson in 1779 and mass-produced by British gunsmith Henry Nock, over 650 Nock seven-shot volley guns were shipped to the British Royal Navy during the Revolutionary War. These distinctive multi-barrel firearms were designed to deliver a tight cluster of shots on a target at greater range and velocity than a shotgun or blunderbuss. Even at a distance, such as firing at the deck of a passing enemy ship, Nock guns could still hit a small area and do more damage than a single musket shot.
Nock Volley guns were used against the French fleet during the Battle of the Saintes in 1782, a major British victory. They went on to enjoy a brief period of popularity as sporting guns in the early 19th Century as well, including goose rifles that employed Joseph Manton’s patented tubelock firing mechanism. The Nock gun’s menacing look and ability to deliver a more accurate cluster shot has earned them roles in movie and television history including The Alamo, Sharpe, Turn: Washington’s Spies, Master & Commander, and more.
Based on multi-barrel volley cannons that have existed since the renaissance, the Duckfoot pistol was about riot control and close-quarters combat. The multiple barrels radiated from the single lock resembled a duck’s foot, giving this early “assault weapon” its popular name. Why fire one shot when you can unload four, five, or six simultaneously?
The Ferguson Rifle and Early Breechloaders
British Captain Patrick Ferguson loved guns and military strategy, and the breech loading rifle he invented in 1774 was produced just in time to unleash his new weapon on the rebellious American colonists. Breech-loading guns were faster than muzzle-loaders, offered the ability to reload from the prone position without breaking cover, and could be reloaded on the move. Ferguson’s rifle was also more effective in damp conditions compared to other flintlocks of the era, and the bold Scottsman was eager to test his new weapon on the battlefield in an effort to “counteract the superiority as marksmen of the American backwoodsmen.”
Ferguson was granted a patent in 1776, and the following year the captain was placed in command of a rifle corps equipped with his secret weapons. 200 Ferguson rifles saw action in the Revolutionary War, including at the Battle of Brandywine and later at the Battle of Kings Mountain, where Ferguson was surrounded and killed. Though four times more costly to produce than a muzzle-loader, Ferguson’s rifle demonstrated the clear advantages of the breech-loading design.
In the following decades, other gunmakers experimented with the breech-loading flintlock, but it wasn’t until 1816 that the United States government purchased them in large numbers. President James Madison, the “Father of the Constitution”, saw the importance of equipping the American military with the latest innovations. Maine gunmaker John H. Hall furnished 100 of his patented breechloaders, and two years later the Hall Model 1819 became the first breech loader to be regularly adopted by a military, as well as the world’s first military rifle designed with completely interchangeable parts. The industrial revolution had arrived, and firearms technology would never look back.
Matchlock and Flintlock Revolvers
Firearms employing revolving cylinder systems were known since at least the seventieth century and likely well before, as indicated by multiple surviving examples. Flintlock and matchlock revolvers were an established technology when the 2nd Amendment was written, though metallurgy hadn’t caught up with the ambitious design enough to allow wide scale production. That is, until the Collier.
English inventor Elisha Collier developed one of the most famous designs for a flintlock revolver in 1814, and thousands were produced for the British Empire in the following years. His business partner, Artemas Wheeler of Concord, Massachusetts, patented the design in America, and Collier began marketing rifle and shotgun versions of his cylinder system to sportsmen and pitching the revolving pistols variants as an option for self-defense. Though Collier’s improved design came to market after the Second Amendment, the revolver concept had been produced for centuries prior.
The Second Amendment Musket Meme
Four ruffians break into my house. “What the devil?” As I grab my powdered wig and Kentucky rifle. Blow a golf ball-sized hole through the first man, he’s dead on the spot. Draw my pistol on the second man, miss him entirely because it’s smoothbore and nail the neighbor’s dog. I have to resort to the cannon mounted at the top of the stairs loaded with grapeshot. “Talley ho lads!”
We’ve all heard a variant of the 2nd Amendment musket meme. It’s a fun bit of humor, and certainly a clever way to illustrate how different guns were in 1776 compared to today, but one need only study examples of repeating firearms available when the American Constitution was written, such as the Girandoni air rifle, the Cookston repeater, and the Belton flintlock to understand the reality was far more complex.
America’s Founding Fathers knew of repeating guns, hoped to produce them for Washington’s Army, and saw them improve and evolve during their lifetimes. And yet the Second Amendment to the U.S. Constitution was not written with any exclusion, or mention of single-shot muskets, repeaters, cannons, war ships, or “assault weapons.”
A well-regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
No asterisks, no limitations. Seems pretty clear.
Rock Island Auction Company’s September Premier Firearms Auction is packed with a wealth of scarce historical firearms, rarely seen prototypes, and unusual gun variants that demonstrate just how innovative our forefathers were when it came to new weapon designs. So while the guns of 1776 vs today are clearly not comparable, and America’s Founders probably couldn’t envision a Colt AR-15/XM16E1 machine gun, they also wouldn’t have been surprised at the continuing evolution of firearms technology that they witnessed numerous times firsthand.
As always, if there are any questions regarding consignment, registration, or future auctions, please contact Rock Island Auction Company today. Our upcoming auction schedule is updated frequently on our website, so be sure to go through the listing and start making your plans to visit. All our events adhere to the latest COVID-19 guidelines and restrictions. We can’t wait to see you here!